UGEARS Tuletõrje Redelauto
Hind:
99,90 €
Mudeli suurus: 330*180*125 mm
Pakendi suurus: 372*170*57 mm
Detailide arv: 594
Koosteaeg: 14-16h
Ugearsi tuletõrjeauto on ehtsa tuletõrje auto mehaaniline koopia. Selle redel on keerlev ning pikenev ja töötab nagu õigetel tuletõrjujatel.
Tuletõrjeautoga on ka võimalik sõita tänu oma kummiratta mootori abil, mille tööd on võimalik ka näha läbi kapoti. Lihtsalt ’käivita’ mootor ning sõida kas edasi või tagasi.
Nagu kõik Ugearsi mudelid, on ka tuletõrjeauto mudeli komplektis detailne õpetus ning varujupid. Mudeli kokku panemiseks ei ole vaja erilisi tööriistu ega liimi, lihtsalt ühenda õiged jupid üksteisega!
The Fire Truck is a self-propelled wooden model from the new UGEARS Trucks collection. Intelligent design mixed with smart engineering inside. The Fire Truck functions like a real Rescue& Fire Truck with turning foot, moving apart & ascending ladder, which transforms into real crane with hook.
The UGEARS Fire Truck is equipped with the retractable 3-Section Fire Ladder on a rotating platform. Length when fully extended – 70cm. The Fire Ladder has several controls. Press the lever and lift up the ladder. Turn the platform to the right or to the left. Fix the selected position with a special ratchet. All three sections of the ladder are extending ahead. Ascend the ladder and you’ll get a real crane with hook at its end.
There is even a little ladder to help Firemen to climb on the truck in few seconds. Like in a real Fire Truck it is mounted on back.
Based on UGM-11 Truck, the Fire Truck is equipped with a four-cylinder rubber band engine and moves on its own forward in the “drive” mode and back on “reverse” transmission mode. Start the engine in 'idle mode' and look at four pistons which move realistically under the folding hood.
Made from sustainable wooden materials the kit has all you need for assembly: a set of high-quality plywood boards with precisely cutout parts, detailed step by step instructions and several spare parts inside.
The cutting is well done; each of the parts comes out of the plywood sheets easily. No glue and special tools are needed for putting the model together. You can assemble it at home on the table. Fits together like a puzzle without glue or special tools thanks to UGEARS’ patented plywood joints
Assemble without glue like all UGEARS models by step-be-step, truly easy to follow, color instruction manual. Pre-cut parts are easily pressed out from the board.
Pakendi suurus: 372*170*57 mm
Detailide arv: 594
Koosteaeg: 14-16h
Ugearsi tuletõrjeauto on ehtsa tuletõrje auto mehaaniline koopia. Selle redel on keerlev ning pikenev ja töötab nagu õigetel tuletõrjujatel.
Tuletõrjeautoga on ka võimalik sõita tänu oma kummiratta mootori abil, mille tööd on võimalik ka näha läbi kapoti. Lihtsalt ’käivita’ mootor ning sõida kas edasi või tagasi.
Nagu kõik Ugearsi mudelid, on ka tuletõrjeauto mudeli komplektis detailne õpetus ning varujupid. Mudeli kokku panemiseks ei ole vaja erilisi tööriistu ega liimi, lihtsalt ühenda õiged jupid üksteisega!
The Fire Truck is a self-propelled wooden model from the new UGEARS Trucks collection. Intelligent design mixed with smart engineering inside. The Fire Truck functions like a real Rescue& Fire Truck with turning foot, moving apart & ascending ladder, which transforms into real crane with hook.
The UGEARS Fire Truck is equipped with the retractable 3-Section Fire Ladder on a rotating platform. Length when fully extended – 70cm. The Fire Ladder has several controls. Press the lever and lift up the ladder. Turn the platform to the right or to the left. Fix the selected position with a special ratchet. All three sections of the ladder are extending ahead. Ascend the ladder and you’ll get a real crane with hook at its end.
There is even a little ladder to help Firemen to climb on the truck in few seconds. Like in a real Fire Truck it is mounted on back.
Based on UGM-11 Truck, the Fire Truck is equipped with a four-cylinder rubber band engine and moves on its own forward in the “drive” mode and back on “reverse” transmission mode. Start the engine in 'idle mode' and look at four pistons which move realistically under the folding hood.
Made from sustainable wooden materials the kit has all you need for assembly: a set of high-quality plywood boards with precisely cutout parts, detailed step by step instructions and several spare parts inside.
The cutting is well done; each of the parts comes out of the plywood sheets easily. No glue and special tools are needed for putting the model together. You can assemble it at home on the table. Fits together like a puzzle without glue or special tools thanks to UGEARS’ patented plywood joints
Assemble without glue like all UGEARS models by step-be-step, truly easy to follow, color instruction manual. Pre-cut parts are easily pressed out from the board.
Video
Sarnased tooted
